Flow Control With 12 Volt DC Solenoid Valve Bypass [903252]

Product Description

FLOW CONTROL UNIT
New, on/off motor control unit marked "FV-4094". A relief valve must be installed upstream of the inlet port for safe operation (sold separately).

When energized, the solenoid valve will allow flow of fluid through orifice, needle valve, and pressure-compensating valve to priority port. When de-energized, solenoid valve will allow bypass of fluid to secondary port. The needle valve will allow partial fluid flow to priority port and partial fluid flow to secondary port when open, but will direct all fluid flow to secondary port when closed. Consists of the following components: 

NEEDLE FLOW RESTRICTOR VALVE

• Manufacturer EATON
• Model FCV7-10-S-0-NVF
• Type Screw-style Needle Valve (fine)
• Flow 10 GPM max.
• Pressure 3000 PSI max.
• Cavity C-10-2
• Fluid Recommendations ISO 4406 (Class 18/16/13) or cleaner

• Manufacturer WEATHERMAN
• Model 15CFCP1-F-08
• Type Priority-type Pressure Compensator
• Flow 15 GPM max.
• Pressure 1500 PSI max.

• Manufacturer WEATHERMAN
• Model 21C11S
• Type Normally Open, Two-Way, Poppet-Style Solenoid Valve
• Features Metered Reverse Flow when De-energized
• Voltage 12 VDC
• Flow 40 GPM max.
• Pressure 3000 PSI max.

• Ports SAE 8 "REG" Port, SAE 10 "SEC" and "IN" Ports
• Mount Two 3/8" dia. holes on 3-3/16" centers
• Size 8-9/16" x 4" x 3-7/8" (total)
• Shpg. 7 lbs. (total)

California Residents

WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov